Serial concatenated convolutional codes

Serial concatenated convolutional codes (SCCC) are a class of forward error correction (FEC) codes highly suitable for turbo (iterative) decoding. Data to be transmitted over a noisy channel may first be encoded using an SCCC. Upon reception, the coding may be used to remove any errors introduced during transmission. The decoding is performed by repeated decoding and [de]interleaving of the received symbols.

SCCCs typically include an , an , and a linking interleaver. A distinguishing feature of SCCCs is the use of a recursive convolutional code as the inner code. The recursive inner code provides the ‘interleaver gain’ for the SCCC, which is the source of the excellent performance of these codes.

The analysis of SCCCs was spawned in part by the earlier discovery of in 1993. This analysis of SCCC’s took place in the 1990s in a series of publications from NASA’s (JPL). The research offered SCCC’s as a form of turbo-like serial concatenated codes that 1) were iteratively (‘turbo’) decodable with reasonable , and 2) gave error correction performance comparable with the turbo codes.

Prior forms of serial concatenated codes typically did not use recursive inner codes. Additionally, the constituent codes used in prior forms of serial concatenated codes were generally too complex for reasonable soft-in-soft-out (SISO) decoding. SISO decoding is considered essential for turbo decoding.

Serial concatenated convolutional codes have not found widespread commercial use, although they were proposed for communications standards such as . Nonetheless, the analysis of SCCCs has provided insight into the performance and bounds of all types of iterative decodable codes including and codes.

US patent 6,023,783 covers some forms of SCCCs. The patent expired on May 15, 2016.

Contents

History

Serial concatenated convolutional codes were first analyzed with a view toward turbo decoding in “Serial Concatenation of Interleaved Codes: Performance Analysis, Design, and Iterative Decoding” by S. Benedetto, D. Divsalar, G. Montorsi and F. Pollara. This analysis yielded a set of observations for designing high performance, turbo decodable serial concatenated codes that resembled . One of these observations was that “the use of a recursive convolutional inner encoder always yields an interleaver gain.” This is in contrast to the use of block codes or non-recursive convolutional codes, which do not provide comparable interleaver gain.

Additional analysis of SCCCs was done in “Coding Theorems for ‘Turbo-Like’ Codes” by D. Divsalar, Hui Jin, and Robert J. McEliece. This paper analyzed repeat-accumulate (RA) codes which are the serial concatenation of an inner two-state recursive convolutional code (also called an ‘accumulator’ or parity-check code) with a simple repeat code as the outer code, with both codes linked by an interleaver. The performance of the RA codes is quite good considering the simplicity of the constituent codes themselves.

SCCC codes were further analyzed in “Serial Turbo Trellis Coded Modulation with Rate-1 Inner Code”. In this paper SCCCs were designed for use with higher order modulation schemes. Excellent performing codes with inner and outer constituent convolutional codes of only two or four states were presented.

Example Encoder

Fig 1 is an example of a SCCC.

The example encoder is composed of a 16-state outer convolutional code and a 2-state inner convolutional code linked by an interleaver. The natural code rate of the configuration shown is 1/4, however, the inner and/or outer codes may be punctured to achieve higher code rates as needed. For example, an overall code rate of 1/2 may be achieved by puncturing the outer convolutional code to rate 3/4 and the inner convolutional code to rate 2/3.

A recursive inner convolutional code is preferable for turbo decoding of the SCCC. The inner code may be punctured to a rate as high as 1/1 with reasonable performance.

Example Decoder

An example of an interative SCCC decoder.


The SCCC decoder includes two soft-in-soft-out (SISO) decoders and an interleaver. While shown as separate units, the two SISO decoders may share all or part of their circuitry. The SISO decoding may be done is serial or parallel fashion, or some combination thereof. The SISO decoding is typically done using (MAP) decoders using the algorithm.

Performance

SCCCs provide performance comparable to other iteratively decodable codes including turbo codes and codes. They are noted for having slightly worse performance at lower SNR environments (i.e. worse waterfall region), but slightly better performance at higher SNR environments (i.e. lower error floor).

See Also on BitcoinWiki

Source

http://wikipedia.org/